MotoE Handlebar

Left Handlebar

•  Rear brake (1)

The lever above the left handlebar activates the rear brake.

• Rear View Mirror Insert (2)

         You can use these inserts for a different style and position of the rear-view mirror.

• Headlight Beam Switch (3)

         When the beam switch is in the forward position, the high beam is activated. When the switch is                 turned to the down position, the low beam is activated. (More information on the high and low                 beam below)

• Hazard Lights (4)

         When the hazard light button is activated, the indicators will all flash together on the dashboard                 and the front and rear indicators signals.

• Turn Signal Indicator Switch (5)

          When the turning switch is pushed to the left, the left indicator will flash. When the turning switch               is pushed to the right, the right indicator will flash. To turn off the indicator, the switch needs to be             positioned in the middle.

• Horn Button (6)

          When the motorcycle is on, pressing down on the horn button will activate the horn.

BLUETOOTH

The MotoE comes with Bluetooth so you can connect your phone. The Bluetooth option is located on the left handlebar.

To activate Bluetooth, press the ‘on’ button located at the top of the Bluetooth band. You will hear a chime as the Bluetooth function turns on.

The Bluetooth name of the bike is WES as seen in the picture below.

The speaker installed in the bike is a tweeter speaker.

Right Handlebar

• Lever, Front Brake (1)

This lever will activate the brakes on the front wheel.

• Throttle (2)

          Pull towards the rider to engage the engine and increase speed. Releasing the throttle will not                    cause the engine brake to kick in. It will only slightly decrease the speed you are travelling at.

• Park (3)

          Park function disengages the throttle. It will stop the bike from rolling forwards or backwards.

          To activate the park function, click the P twice.

• Power selection (4)

         Power selection allows the rider to choose the power output of the bike. The lowest setting, 1, will             conserve the charge of the bike, increasing the range. This selection will also limit the top speed of             the bike. The reverse is true for 3. In the 3^rd power selection option, the faster the bike will                         accelerate and the higher the top speed becomes. 1 is the lowest possible power selection option.             3 is the highest possible power selection option.

• Reverse function (5)

          The MotoE comes with a reverse function. To utilise the reverse function of the bike, the bike must            first be turned on. To reverse, press and hold the reverse button while gently pulling down on the              throttle.

• Removed feature (6)

          The green spanner is a removed feature. The original purpose was to access settings on the                        display. Due to ADR compliance, this feature had to be disconnected.

• Light activation (7)

          If this light bulb button is activated, the headlights on the MotoE will be deactivated. The                            headlights should come on when automatically when you start the bike’s ignition. If the lights do              not come on, the light activation switch may be on turning the lights off.

• Rear View Mirror Insert (8)

          You can use these inserts for a different style and position of the rear-view mirror.