What is required to fit dirt wheels into the SS125?
Front 14”
Complete wheel including Rim 14
Tube 60/100 14
Tyre 60/100 14
200 or 210 Disc
Bearing 6202 12mm sleeve x2
Spacers
1. 12mm OR 15mm centre 28mm length
2. 12mm OR 15mm centre 15mm length
Front wheel Calliper
7 washers used as one spacer (inner side)
1 washer as a spacer (the exterior side with the bolt) 2x M6 45 MM bolt
Rear 12”
Rear wheel complete including
Rim
Tube 80/100/12
Tyre 80/100/12
Sprocket 37 tooth 420 pitch
Disc 200 mm preferred or 210
Spacer (Sprocket side) 38mm Length 15 mm centre Spacer 23mm spacer 15mm centre plus two washers 420 Chain
420 front Sprocket
16 tooth 420 Sprocket 17mm
Comments
0 comments
Please sign in to leave a comment.