Moto3 Service Information – braaap Motorcycles

Self Serve Programme
First Service 500-800km THEN every 3000km
Braaap MOTO3 Motorcycle	COMPLETED








WE RECOMMEND YOU HAVE A CONTAINER TO PLACE ALL ITEMS IN WHILST
WORKING TO ENSURE YOU HAVE NOTHING LEFT OVER WHEN FINISHED
Oil: 10W/40 Mineral Motorcycle Oil
Drain oil, check is there any unusual things floating in it. (Drain via plug/cap on left hand side)
Remove Gauze Oil Filter
Check for any unusual debris
Clean gauze with Brake Cleaner / Then blow out with air
Reinstall Oil Filter Gauze
Replace oil 1.3 Lt of 10W/40 Mineral motorcycle oil
Refit SUMP PLUG/ Oil drain Cap
Un screw dipstick
Dip the dipstick
Oil should be at the top of the cross hatching marks
Check oil levels Only when bike is standing UPRIGHT NEVER ON THE SIDE STAND

Air Filter:
Remove both seats
Remove cap from air box
Remove air filter
Inspect, usually only needs replacing at around 1800km but depends on riding conditions

Refit Air Filter
Spark Plug: Remove and clean
Idle: Check idle 1500-2000 Revs
Horn: Is it working
Lights: Confirm all lights are working
Head light low beam
Head light high beam
Taillight
Indicators
Chain: Chain health
Ensure chain is adjusted to recommended tension if not FIX IT
Lubricate (Do not lubricate it close to the brakes, lubricate from the centre.)
Tyres: Health
28 PSI Front
32 PSI Rear
Check tyre wear
Swing Arm Bolt: Tension swing arm bolt to 90NM
Engine Mount Bolts: Check
Fairing Screws: Check
Bolts: Start from front of bike and work your way back checking ALL bolts.
Check Neck Nut / Steering Bearing Adjustment
Check fork operation
Check rear shock operation
Back wheel: Wobble and Check (wheel bearings?)
Front wheel: Wobble and Check (wheel bearings?)
Brakes: Visual brakes, are they good
Cable: Check clutch cable
Clutch lever free play
Throttle level free play


I take full responsibility for the Servicing of Motorcycle with Vin number Date Name Signature

Related articles