Using the Fob
- Lock and Unlock
The MotoE comes with an alarm system for extra security for your bike. To activate the alarm, turn the bike off and remove the key from the ignition. Press the lock button. The bike will make a sound indicating the lock feature has been activated.
To turn the lock feature off, click the unlock button. The bike will make a sound indicating the lock feature has been deactivated.
If you have the bike locked and try to use the key in the ignition, it will sound the alarm. This can be turned off by pressing the unlock button on the fob.
The MotoE can be started and ridden without the use of a key. To start the engine without the key, press the power button twice on the fob. The bike will make a noise when you press it the first time. It will start up when you press it a second time.
To turn it off without the key, press the unlock button on the fob.
When you have turned the bike on with the fob, you cannot use the key to turn it off. It must be turned off using the fob
If the alarm is in active mode
The alarm is activated via the lock button on the FOB, and the ignition is turned on, the alarm will sound. When the ignition is turned on while the alarm is activated, it will light up the dashboard momentarily.
If the alarm activated via the FOB and the brakes are applied, the dashboard may light up momentarily. This is not a fault.
If the alarm is activated and the rider kicks the stand up before deactivating the alarm, the alarm will sound four times.
All these things are not faults with the bike, they are a pre-alert condition and are perfectly normal occurrences.
If the side stand is down, to park the bike, and the ignition is on, the brake light will be activated. If the rider applies the brakes while the side stand is down, the brake light will already be activated and will not increase the brightness of the brake light.
This is not a fault and is a perfectly normal occurrence.
Recommended treatment of FOB
We suggest it is not a good idea to leave the key FOB dangling off your ignition keys, as potential swaying in the wind can cause damage to the delicate internal electronics by it hitting into different parts of the bike. Suggest carrying it in pocket or secure to top triple clamp via Velcro or something similar.
The M icon is for Motor.
The Cruiser Control Icon is not used on this model of bikes.
The bottom right hand side red icon is for the controller.
To lock steering, turn the front wheel to left, then insert the key into the ignition and turn the key anti-clockwise (left) to the lock symbol. We suggest using the steering lock while parking.
Please sign in to leave a comment.